Florence

Usually, no. Chalk Paint® adheres to most surfaces without extensive prep, so sanding or priming is rarely necessary. For glossy finishes, laminate, melamine, or surfaces with residue, a light scuff sand can help improve adhesion.

Most projects don’t require primer. On older furniture, stained wood, or surfaces prone to tannin bleed-through, a coat of clear shellac or stain blocker may be needed before painting. Whites and light colors are the most likely to show bleed-through.

Chalk Paint® works beautifully on furniture, cabinets, walls, floors, metal, brick, concrete, terracotta, and more. It adheres to almost any surface indoors or outdoors.

Yes — with a little prep. Lightly sand the surface, apply a thin first coat, and allow it to dry thoroughly before continuing. This helps the paint properly bond to slick surfaces like laminate or melamine.

If you’re painting new, untreated wood, apply a clear shellac onto any knots. If you see a stain bleeding through after you start painting, one or two coats of shellac will block the stain. It dries in minutes, and then you can get on with your painting.

Chalk Paint® has a soft matte finish with visible depth and texture. It can be left smooth and modern or layered for a more artistic, timeworn look.

Possibly — and that’s often part of the charm. Chalk Paint® is designed to be expressive and forgiving, whether you prefer a smooth contemporary finish or visible painterly texture.

Absolutely. Chalk Paint® was designed with decorative finishes in mind. Light distressing with fine grit sandpaper creates a naturally aged appearance with very little effort.

Yes — the colors are intentionally designed for mixing. You can blend shades together to create softer tones, custom colors, or layered finishes unique to your project.

Yes. Chalk Paint® should always be finished with either Wax or Lacquer for durability and protection.

Wax gives a soft, velvety finish ideal for furniture and decorative pieces. Lacquer offers stronger protection for floors or higher-traffic surfaces.

• Shop Wax →
• Shop Lacquer →

Very — especially once sealed properly. Waxed finishes continue curing over time and hold up beautifully to everyday use.

Wax dries quickly to the touch, but full curing typically takes between 5–21 days depending on temperature and humidity.

Once fully cured, Chalk Paint® Wax is considered food-safe and toy-safe.

Most projects need one to two coats depending on the surface, color, and desired coverage. Dark surfaces may require additional coats.

Yes. Brushes create the most texture and depth, but Chalk Paint® can also be rolled or sprayed depending on the finish you want.

Look for brushes with long, flexible bristles that hold plenty of paint. Natural bristle brushes are ideal for creating expressive texture and smooth coverage alike.

As a general guide, one litre of Chalk Paint® covers approximately 150 square feet. Most furniture pieces require far less, depending on the size of the piece and the number of coats used.

Pure is a bright, clean white with very little pigment tinting, so it can sometimes appear more translucent than other colors. Applying an additional coat — or using Country Grey underneath — can improve coverage.

Yes. Chalk Paint® colors are designed to mix beautifully, making it easy to create softer tones, custom colors, or entirely unique shades for your project.

Wax slightly deepens the color and adds richness to the finish, similar to how water deepens natural wood or stone.

Consider the lighting in your space, the mood you want to create, and the other finishes nearby. Warm neutrals tend to feel soft and organic, while cooler tones create more contrast and drama.